Find us on Facebook
More keeppies by Review Summary
iMBAPrice (Pack of 2) 2.5 To 3.5 Bay SSD HDD Laptop Hard Disk Drive Metal Black Mounting Bracket w-60mm Fan by Review Summary ,  Oct 7, 2015

You are considering to buy this product but can not go over hundreds and thousands of reviews? This is just because there are too many of them. Would you like to have review summary with all positives and negatives presented on a single page? Here you are! We have developed a unique algorithm summarizing thousands of user reviews and presenting you with a product report. We hope this report will be useful in your decision. Enjoy!

Top of the page

iMBAPrice (Pack of 2) 2.5" To 3.5" Bay SSD HDD Laptop Hard Disk Drive Metal Black Mounting Bracket w/60mm Fan
Report Date: 10/10/2015
Based on 287 customer reviews
Overall satisfaction: 4.5
Returned or considering to return: 1.4%

Buy on Amazon

Frequently Mentioned by Customers:


Individual Feature Rating
Price4.6   above average
Quality4.6   average
Bracket4.2   average
Screw4.0   average
Case3.5   below average


Quotes from the Reviews - What People Say about:

Bracket

Bracket:
"Considering what is placed inside of this bracket, the gauge of the steel is excessive."
_
"Only negative is that the bracket uses non-standard screws that's usually used in computer cases."
_
"The negatives of this unit are: Screws that mount this bracket to your HDD cage are difficult to thread."
_
"the bracket is tough as nails and is more sturdy than my nzxt guardian case that i am currently using but unfortunately the holes on the bracket are a little bit too small."
_
"Fit perfectly regarding the width using my tool-less brackets."
_
"As far as vthe design and sturdiness of the bracket, let's not make too much of it please, it is a bent painted piece of sheet metal."
_
"A good quality bracket should align the SATA interface with that of the standard hard drive location; this does not."
_
"Because of this it will only work on about 60% of workstations without either bending your SATA wire further than recommended or modifying the bracket."
_
"Nothing fancy, just a good bracket to hold the drives securely and correctly."
_

Back to top         Buy on Amazon

Case

Case:
"Did its job well a few of wholes didn't line up as perfectly as i would have liked both with my case and the drive."
_
"Unfortunately the hard drive mounts in my Antec case are bottom mount and this bracket doesn't have holes on the bottom."
_
"the bracket is tough as nails and is more sturdy than my nzxt guardian case that i am currently using but unfortunately the holes on the bracket are a little bit too small."
_
"I have used these trays no problem in various OEM cases such as Dell's SFF cases which are notorious for being proprietary with their weird drive trays."
_
"As advertised, only complaint is the mounting hold to attach it to the case are not large enough to allow my case screws to screw in and mount it in my removable hard drive cage."
_
"This was a good product, but it didn't fit in my case."
_
"This fit perfectly in a Coolermaster Haf 922 case with its' tool less hard drive bays."
_
"One went into a Dell OptiPlex 780, the other went into a Antec 300 case, both without problem and without dimensional conflicts."
_
"Very affordable and fit perfectly in my case."
_
"Works great, holds my 2.5 SSD pretty nicely and mounts to my mini tower case's HDD slot securely."
_

Back to top         Buy on Amazon

Price

Price:
"I was worried about the effectiveness based on the price, but it is very sturdy, well made, and everything fit like a dream!"
_
"Not only is it a great price but the materials used feels great and sturdy and the color is great."
_
"cheap product and does what it needs no complaints here"
_
"Considering the very low price, I almost expected a flimsy piece of metal."
_
"Good product; good price."
_
"It's a good drive and the price is good for a ssd."
_
"Great product, great price, right on time."
_
"Cheap and effective."
_
"good price."
_

Back to top         Buy on Amazon

Quality

Quality:
"Good product quality, can't say nothing negative about it, product or service."
_
"I suppose the low price had me expecting low quality, I'm pleased to see I was wrong on this."
_
"It's a quality piece, and came with screws which was nice."
_
"A good quality bracket should align the SATA interface with that of the standard hard drive location; this does not."
_
"Good quality."
_
"Use these on my ssd 840 and my 2.5 harddisk, they work great and the build quality is really good"
_
"It's good quality, but my situation would not allow for me to use it, as these were mounted in a drive carrier, and the disk sits further back than a traditional disk."
_

Back to top         Buy on Amazon

Screw

Screw:
"My only complaint is that it needs bottom mount screw holes."
_
"Only negative is that the bracket uses non-standard screws that's usually used in computer cases."
_
"the screws they give didn't fit my drive they where the wrong type."
_
"These parts are have a thick black coating, including the tapped screw threads, which is evidently the cause of the problem."
_
"The negatives of this unit are: Screws that mount this bracket to your HDD cage are difficult to thread."
_
"Screws lined up, and np problems with installation."
_
"Heavy duty metal gives excellent support for SSD and includes screws."
_
"I have 10 of these sitting on my desk the width is .030 wider than a standard drive so it will not fit correctly in anything with accurate tolerances, the screw that are sent with it are convex and cause the drive to sit .098 above any back plane socket, because of the screw placement the drive is placed 1.0' behind where it is suppose to and the drive is centered putting the socket .75 away from were it would normally be."
_
"It's a quality piece, and came with screws which was nice."
_
"Didn't try using a smaller screw because I didn't have any around, but you might be able to find one that fits so you don't have to drill anything."
_
"nice solid metal feel, screw holes line up & screws provided."
_

Back to top         Buy on Amazon
Comments: